• 20-30 watts or 200C/390F to vaporize noids
  • Finish/empty a tank prior to refilling
  • Cleaning a tank:
    • Empty the tank/burn off all remaining e-juice
    • Take tank apart and the coil out, keep all components in a small bowl
    • Rinse all components under warm water
    • Put water in bowl and microwave for 2 minutes
    • Rinse components again
    • Dry components with a paper towel
  • Cleaning a really dirty tank
    • Rinse/soak in propylene glycol, vodka or vinegar instead of water, or combine water with dish soap, then rinse thoroughly
  • Cleaning a coil head
    • Find out which type of coil you have, replaceable or rebuildable. Replaceable ones are almost impossible to clean
  • If it’s a replaceable coil just rinse it and wait for it to evaporate dry
    • If it’s rebuildable, remove the wick
    • If it’s not very dirty just fire it up without the wick a few times to burn off remaining material
    • If it’s very dirty remove wick, dry burn lightly, remove atomizer and rinse in running water
    • Can use a toothbrush or coil cleaning tool to remove residue
    • Rinse and dry burn to evaporate off remaining water, can use dishwashing fluid to help remove oils but be extra careful to rinse thoroughly clean.
  • Dab rig guide
    • Steel is the correct temperature when it turns straw/pale yellow coloured
    • Titanium is the correct temperature below it’s first colour change so is harder to guesstimate
    • Glass/crystal is the correct temperature below it’s first colour change so is also difficult to guesstimate
    • E-nail with customizable temperature is the safest bet for using a dab rig
  • Vaporizers
    • A pocket vaporizer or tabletop vaporizer with a temperature control setting and a concentrate pad is also a good option